Fun
Enduro
adds odometer, speedometer and keytime clock to
your motorcycle.
It is intended for use by kids and adults in events where
computers are not permitted.
This app will add speedometer and odometer to any
motorcycle by using phone GPS
It is NOT an enduro computer.Features-
Constant
display of -
- Mileage
- Speed
- Key Time
 |
Setup - Rider inputs race data -
- Time of day for Race Start
- Key Time, matching clock at sign up
- Row Number
- For Bluetooth, input wheel circumference
Pressing the H or 1 buttons reveals other
choices.
For example pressing H adjacent to 'Start Time'
will change the H to M, allowing rider to adjust
Minutes. Then press + or - to adjust value.
'Set Mileage' allows rider to set mileage to zero
after event, or make large changes easily
|
Operation
Once all data has been input, Rider clicks on 'GO' flag
Prior to start time, the app will countdown to start
time.
When Start time arrives, Mileage and Speed are displayed.
Mileage
At all times, the
current mileage is displayed.
Speed
At all times, the
current required speed is displayed.
Key
Time
At all times, rider's
key time is displayed.
The displayed value is identical to adjusting rider's
wrist watch backward based on rider row number.
For example: If correct time of day is 9:00, and rider is
on row 10, Key Time will display 8:50.
Special
Features
Mileage Adjustment
When using
either GPS or bluetooth input, it may be possible for
mileage to become incorrect.
- in the case of bluetooth, usually due to an off course
excursion
- in the case of GPS , probably due to inaccuracies
introduced by poor GPS coverage.
In either case mileage can be corrected in 0.1 mile
increments with a single swipe of the screen.
Each swipe to the right adds 0.1, each swipe to the left
subtracts 0.1.
Calculations
The app does
NOT make any time keeping calculations.
GPS
Standard
operating mode uses the phone's built-in GPS to track
rider mileage.
To use GPS, set Bluetooth to off on the app Setup page.
Bluetooth
For improved
mileage tracking accuracy Bluetooth is recommended.
Operation with Bluetooth requires the purchase of a
separate bicycle style Bluetooth sensor.
To use Bluetooth, set Bluetooth to ON on the Setup page.
Be sure to purchase a 'speed' type sensor (not cadence
type sensor).
Fun Enduro has been tested - successfully - with the
following sensors:
- wahoo (must be 'speed' model not 'cadence')
- xoss (Developer's favorite - good price, good
quality)
- cycplus (must be 'speed' model not 'cadence') very
inexpensive, but less robust than the other two
|